General Purpose Brand
Models 20, 23, 28, 30 (Bariatric)
Models 18S, 24S & 30S - With or without holes
Models 23W & 28W
Models 23R & 28R
Model TCW
Model TC30
Models CC
Model Q
Model Curved
Model 40B

Designed in cooperation with clinicians at G.F. Strong Rehab Centre with a view to optimizing strength to weight and shaped for specific tasks.
All boards are made as thin and light as possible using durable, multi-ply Baltic Birch finished with a non-marring, slippery durable finish. The boards have rounded corners and beveled edges to make positioning simple and minimize the risk of skin and equipment damage. Boards have a minimum capacity of 250 lbs.

General Purpose Brand

• shaped to allow transfers to and from a wheelchair
• optional holes for finger/thumb

Model	Length	Width	Thickness
Model 20	19¾"	8½"	¼" (6mm)
Model 23	23"	8½"	¼" (6mm)
Model 28	28"	9¾"	3/8" (9mm)
Model 30 (Bariatric)	29¼"	12"	½" (12mm)
Model 18S	18"	8"	½" (12mm)
Model 24S	24"	8"	5/8" (15mm)
Model 30S	30"	8"	3/4" (18mm)

Model 30 (Bariatric)

• same shape as General Purpose board
• 50% thicker
• 50% heavier
• weight capacity: 400 lbs

Models 18S, 24S & 30S - With or without holes

Models 23W & 28W

Similar to the General Purpose board but designed specifically for transfers to and from a soft surface like a bed or couch. The extra wide end spreads the weight of the user over a larger surface to minimize sinking and reduces the change in transfer heights. The narrow end makes placing the board under the users thigh relatively easy.

Model	Length	Width	Thickness
Model 23W	23"	13 1/2"	1/4" (6mm)
Model 28W	28"	13 1/2"	1/4" (6mm)

Models 23R & 28R

Designed to stay in place when sliding. The two slots provide a means of securing the board to the tire when sliding into or out of the wheelchair.

Model	Length	Width	Thickness
Model 23R	23"	11"	3/8" (9mm)
Model 28R	28"	11"	3/8" (9mm)

Model TCW

Model	Length	Width	Thickness
Model TCW	29"	16"	3/8" (9mm)

Model TC30

Model	Length	Width	Thickness
Model TC30	29"	12½"	3/8" (9mm)

Model TCC

• especially designed to make car transfers safer
• easy to position by rotating under thigh
• board locks into position and is secured by wheel
• length: 29½"
• width: 8½" sliding width plus hook
• thickness: 3/8"
• weight: 2.25 lbs.
• large hand-holes
• capacity: 250 lbs.

Model	Length	Width	Thickness
Model TCC	29"	12½"	3/8" (9mm)

Model Q

Model	Length	Width	Thickness
Model Q	28"	7 - 10"	3/8" (9mm)

Model Curved

Model	Length	Width	Thickness
Model Curved A	28"	At ends: 14" Center: 10"	3/8" (9mm)
Model Curved B	28"	8"	3/8" (9mm)

Model 40B & Model L

Model	Length	Width	Thickness
Model 40B	40"	At ends: 12" Center: 9"	3/8" (9mm)
Model L	22"	8 1/2"	3/8" (9mm)